Flashforge
Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer | FF-C5
Best price right now
€679.95
euronics.ie
In stock · Checked 52 min ago
You complete the purchase on their site
Set a price alert- Offers tracked
- 1
- Price range
- €679.95
The Flashforge Creator 5 Four-Toolhead Multicolour 3D Printer | FF-C5 is currently €679.95 at euronics.ie.
Compare 1 offer
Ranked by price. You buy on the retailer's own website.
Updated 52 min ago
- euronics.ieBest priceChecked 52 min agoIn stockIn stock€679.95Go to shop
Purchases are completed on the retailer's own website. Prices may change after the last check.
Also worth a look: the deals we spotted on amazon.ie, picked by hand and checked daily.
Price history
All-time low todayDaily cheapest offer across all tracked retailers, observed on 26 days.
€679.956 Oct (latest)
€679.95€679.95
6 Oct6 Oct
Current cheapest
€679.95
Lowest, last 30 days
€679.95
Lowest ever recorded
€679.95
30-day average
€679.95
Across 26 days of tracking since 6 Oct, the lowest price recorded was €679.95. Over the last 30 days it averaged €679.95 with a low of €679.95. Today's cheapest price at euronics.ie matches the 30-day low.
Price alert
Email me when this product drops below your target.
Full specifications
- Model
- Creator 5
- Printing technology
- FDM
- Toolheads
- 4 independent toolheads
- Build volume
- 256 x 256 x 256 mm
- Max travel speed
- 600 mm/s
- Max print speed
- 300 mm/s
- Max acceleration
- 30,000 mm/s²
- Max flow rate
- 32 mm³/s
- Max extruder temperature
- 320°C
- Nozzles
- Removable hardened steel; 0.4 mm standard, 0.25 / 0.6 / 0.8 mm optional
Show all 29 specificationsShow fewer specifications
- Max bed temperature
- 120°C
- Build plate
- Textured PEI flexible steel plate
- Bed levelling
- Automatic
- Calibration
- Multi-toolhead offset calibration, dynamic flow (pressure advance) calibration
- Recommended filaments
- PLA, PETG, TPU-90A (top external mount), TPU-95A, TPU-64D, PLA-CF, PETG-CF, Silk, PVA, BVOH
- Filaments supported with an enclosure
- ABS, ASA, HIPS, ABS-GF, PA-CF, ASA-CF, ASA-GF, S-Multi, S-PAHT, PET-CF, PAHT-CF, PPA-CF, PPS-CF
- Filament detection
- Run-out sensor
- Power-outage recovery
- Yes
- Chamber lighting
- Yes
- Camera
- Built-in, 1280 x 720 at 30 fps
- Display
- 4-inch 800 x 480 colour touchscreen
- Connectivity
- Wi-Fi (2.4 GHz / 5 GHz), USB
- Slicing software
- Orca-Flashforge, OrcaSlicer
- Multi-printer management
- Yes
- One-touch power on/off
- Yes
- Frame
- Open frame
- Power supply
- 100–120 V / 200–240 V AC, 50/60 Hz, 700 W
- Dimensions
- 436 x 432 x 480 mm without filament tubes and holders; 520 x 443 x 710 mm with
- Weight
- 14 kg net, 18 kg gross
People also compared
Why these offers are grouped
This product currently has a single tracked offer.