Flashforge
Flashforge Creator 5 Pro Enclosed Four-Toolhead 3D Printer | FF-C5P
Best price right now
€829.95
euronics.ie
In stock · Checked 54 min ago
You complete the purchase on their site
Set a price alert- Offers tracked
- 1
- Price range
- €829.95
The Flashforge Creator 5 Pro Enclosed Four-Toolhead 3D Printer | FF-C5P is currently €829.95 at euronics.ie.
Compare 1 offer
Ranked by price. You buy on the retailer's own website.
Updated 54 min ago
- euronics.ieBest priceChecked 54 min agoIn stockIn stock€829.95Go to shop
Purchases are completed on the retailer's own website. Prices may change after the last check.
Also worth a look: the deals we spotted on amazon.ie, picked by hand and checked daily.
Price history
All-time low todayDaily cheapest offer across all tracked retailers, observed on 26 days.
€829.956 Oct (latest)
€829.95€829.95
6 Oct6 Oct
Current cheapest
€829.95
Lowest, last 30 days
€829.95
Lowest ever recorded
€829.95
30-day average
€829.95
Across 26 days of tracking since 6 Oct, the lowest price recorded was €829.95. Over the last 30 days it averaged €829.95 with a low of €829.95. Today's cheapest price at euronics.ie matches the 30-day low.
Price alert
Email me when this product drops below your target.
Full specifications
- Model
- Creator 5 Pro
- Printing technology
- FDM
- Toolheads
- 4 independent toolheads
- Build volume
- 256 x 256 x 256 mm
- Max travel speed
- 600 mm/s
- Max print speed
- 300 mm/s
- Max acceleration
- 30,000 mm/s²
- Max flow rate
- 32 mm³/s
- Max extruder temperature
- 320°C
- Nozzles
- Removable hardened steel; 0.4 mm standard, 0.25 / 0.6 / 0.8 mm optional
Show all 32 specificationsShow fewer specifications
- Max bed temperature
- 120°C
- Build plate
- Textured PEI flexible steel plate
- Bed levelling
- Automatic
- Calibration
- Multi-toolhead offset calibration, dynamic flow (pressure advance) calibration
- Active chamber heating
- Up to 65°C
- Air filtration
- HEPA 13 filter plus activated carbon
- Auxiliary cooling
- Auxiliary cooling fan
- Door detection
- Front door and top cover
- Recommended filaments
- PLA, PETG, TPU-90A (top external mount), TPU-95A, TPU-64D, PLA-CF, PETG-CF, Silk, PVA, BVOH, S-Multi, S-PAHT, ABS, ASA, PA-CF, PET-CF, PAHT-CF, ASA-CF, ASA-GF, ABS-GF, PPA-CF, PPS-CF, HIPS
- Filament detection
- Run-out sensor
- Power-outage recovery
- Yes
- Chamber lighting
- Yes
- Camera
- Built-in, 1280 x 720 at 30 fps
- Display
- 4-inch 800 x 480 colour touchscreen
- Connectivity
- Wi-Fi (2.4 GHz / 5 GHz), USB
- Slicing software
- Orca-Flashforge, OrcaSlicer
- Multi-printer management
- Yes
- One-touch power on/off
- Yes
- Frame
- Enclosed
- Power supply
- 100–120 V / 200–240 V AC, 50/60 Hz, 1200 W
- Dimensions
- 441 x 411 x 460 mm without filament tubes and holders; 520 x 443 x 710 mm with
- Weight
- 18 kg net, 22 kg gross
People also compared
Why these offers are grouped
This product currently has a single tracked offer.